Beyerdynamic MCS-D 200 - Manual (Page 68)

MCS-D 202 Interpreter Station
E 68
7.4.5 How to assign the interpreter ID
Each interpreter station should be specified with an identification number (ID) in order to render an address. This may be done
via the INTERPRETER IDs menu of the MCS-D 200 control unit (refer also to chapter 3.3.8 “Interpreter IDs”).
Optional, the identification numbers may directly be assigned at each interpreter station one after the other. This way, you will
always have an overview of the system, especially of large systems.
An interpreter station ID (identification number) is composed of the BOOTH ID and the DEVICE ID. Please make sure that every
identification number is only assigned once in order to avoid conflicts. Interpreter stations of different booths may have the
same DEVICE ID.
For example:
Booth 1: MCS-D 202 microphone station (1): 01-0001
MCS-D 202 microphone station (2): 01-0002
Booth 2: MCS-D 202 microphone station (1): 02-0001
MCS-D 202 microphone station (2): 02-0002
Activate SET ID mode
Press the following three buttons one after the other:
1. Right relay channel PRE-SELECT button
2. Right output channel PRE-SELECT button
3. Press MENU button
The “SET ID” line appears on the left display.
01-0001= MICROPHONE STATION ID
01 = BOOTH
0002 = DEVICE ID
1. Press right relay channel PRE-SELECT button 2. Press right output channel PRE-SELECT button
3. Press MENU button