Beyerdynamic MCS-D 200 - Manual (Page 24)

MCS-D 200 Control Unit
E 24
3.3.4.4 Interpreter
In the INTERPRETER menu you can prepare a list of all required interpreter’s channels from the list of session channels for the
selected session (here: session 01) (refer also to chapter 3.3.4.2 “Channel List”). The list includes only channels required for
interpreters, i.e. all channels for the preselection of the relay and output channels.
When the relay channel or PRE SELECT output channel button of the MCS-D 202 interpreter station is pressed, the list of the
interpreter channels is displayed.
Then select from the booth list all booths required for the selected session (refer to chapter 3.3.7.1 “ID List”).
How to prepare the list of interpreter’s channels for the session
In the INTERPRETER menu you can prepare a list of all required interpreter’s channels from the list of the session channels
(refer to chapter 3.3.4.2 “Channel List”) for the selected session (here: session 01).
Use the up or down navigator button to select the channel which is to be added to the interpreter’s channel list. Then press
the SET button. The star identifies the selected channel. Repeat these steps to add more channels to the list.
Press the RESET button if you want to remove a selected channel from the interpreter’s channel list. The star is removed.
Repeat these steps if you want to remove more channels from the interpreter’s channel list.
Press the EXIT button to leave this menu.
press ENTER button
The arrow indicates the active line.
Session number
press the ENTER button
The star identifies the selected channel.
Session number
Use the up or down navigator button to
scroll through the menu
Use the up or down navigator button to
scroll through the menu