Beyerdynamic MCS-D 200 - Manual (Page 60)

MCS-D 3171 / 3173 Microphone Stations
E 60
7.3.4 How to turn on the MCS-D 3171
Press the microphone button once to turn on the microphone or to enter a request-to-speak. Press the microphone button
once again to turn off the microphone or to cancel a request-to-speak.
• When the microphone is activated, the LED of the microphone button and the LED strip will illuminate.
• When a request-to-speak is entered, the LED of the microphone button and the LED strip will flash. The request-to-speak
is registered and the microphone is activated via the iCNS software.
• If the selected limit of open microphones is exceeded, the LED strip and the LED of the microphone button will flash
briefly and the delegate has to either turn on the microphone or enter a request-to-speak later.
Depending on the selected operating mode, the LED strip and the LED of the microphone button display the indications
described below:
FREE MODE
The microphone is turned on by pressing the microphone button, if the limit is not yet achieved. If the limit is exceeded, the
LED strip and the LED of the microphone button will flash briefly. The delegate has to try later to turn on the microphone.
REQUEST MODE
The request-to-speak is entered by pressing the microphone button. The request-to-speak is registered and the microphone is
activated via the iCNS software. The request-to-speak can be cancelled by pressing the microphone button once again. If the
limit is exceeded, the LED strip and LED of the microphone button will flash briefly. The delegate has to try again to enter the
request-to-speak later.
AUTO MODE
The delegates activate their microphone or enter a request-to-speak one after another. A delegate can activate his microphone
by pressing the microphone button if the selected limit is not yet achieved. If the limit is exceeded, the request-to-speak is
registered by the MCS-D 200 control unit and the microphone is activated automatically as soon as another speaker turns off
his microphone. The request-to-speak can also be cancelled by pressing the microphone button once again. If the selected limit
for requests-to speak is exceeded, the LED of the microphone button and the LED strip will flash briefly. The delegate has to try
again to enter his request-to speak later.
FIFO MODE (FIRST IN - FIRST OUT)
The delegates speak one after another. A delegate can turn on his microphone by pressing the microphone button at any
time. If the selected limit is exceeded, the microphone of the speaker who turned on his microphone first, is deactivated auto-
matically (first in-first out).
4
FREE - limit is not yet achieved: FREE - limit is exceeded:
LED of the microphone button and LED strip will illuminate
-> Microphone is turned on LED of the microphone button and LED strip will flash briefly
-> Try again later!
REQUEST - limit is not yet achieved: REQUEST - limit is exceeded:
LED of the microphone button and LED strip will flash
-> Microphone is activated via the iCNS software LED of the microphone button and LED strip will flash briefly
- no registration!
-> Try again later!
AUTO - limit for turned on
microphones is not yet achieved: AUTO - limit for turned on
microphones is exceeded: AUTO - limit for requests-to-speak is
exceeded:
LED of the microphone button and the
LED strip will illuminate
-> Microphone is turned on LED of the microphone button and the
LED strip will flash
-> Microphone is turned on auto-
matically as soon as another speaker
turns off his microphone
LED of the microphone button will flash
briefly
-> Try again later!
7.3.3 How to display messages
If a message is sent by using the iCNS software, it will appear in the LC display of the appropriate microphone station. In
the second line the message “Press Yes” will be displayed. This means the “Yes” button of the five voting buttons has to be
pressed to delete the messsage.
During a voting pressing the “Yes” button the first time deletes the message; pressing the “Yes” button a second time means
voting with “yes”. 5
6
2
2
2