JLG X14JH Operator Manual - Manual (Page 13)

2.1.3 TECHNICAL DATA
2.1.3.1 PLATFORM TECHNICAL DATA
....................................................................................................LOAD 200 kg .... LOAD 120 kg
PLATFORM HEIGHT (tread level ) ......................................10,58 m ..........11,90 m
MAXIMUM WORKING HEIGHT ............................................12,68 m ..........14,00 m
STANDARD CONTROL CAR DIMENSIONS ..............................1330x694 H1100 mm
HORIZONTAL RANGE ..........................................................5,16 m ............6,50 m
MAXIMUM WORKING HORIZONTAL RANGE ..........................5,66 m ............7,00 m
ROTATION (non continuous) ....................................................300°................300°
PLATFORM CAPACITY ..........................................................200 kg, ............120 kg
MAX GROUND REACTION PER STABILISER ..............................................1330 daN
MAX GROUND PRESSURE PER STABILISER ..........................................1,9 daN/cm
2
OPERATORS N° ............................................................................2 ....................1
OPERATOR N° IN SINGLE- SEATER BASKET (OPTION) ..................1 ....................1
JIB-TYPE ARTICULATION ............................................................../ ......
80° (+0°/-80°)
MAX WORKING INCLINATION..................................................................1°/1,75%
MAX STABILISING INCLINATION ......................................................................10°
OVERALL WEIGHT IN TRANSPORT POSITION..............................................1700 kg
THERMIC ENGINE....................................................HONDA GX270-9 CV-3000 rpm
............................................................HONDA GX390-13 CV-3000 rpm (Optional)
....................................................................................HATZ 1B30-7 CV-3000 rpm
ELECTRIC ENGINE......................................................2,2 kw/230V/50Hz 1500 rpm
..................................................................2,2 kw/110V/50Hz 1500 rpm (Optional)
ELECTRIC SYSTEM VOLTAGE............................................................................12 V
PUMPS ....................................................................................................2x3,15 cc
MAX TRANSLATION SPEED (thermic engine) ............................................1,4 km/h
MAX TRANSLATION SPEED (thermic engine) with 2
nd speed (optional) ........1,4/2,8 km/h
STAB/TRANSLATION SYSTEM PRESSURE ....................................................175 bar
OVERHEAD PART PRESSURE ......................................................................180 bar
MAX UPPER SLANT IN RUNNING CONDITIONS (angle of attack) ........18,5°/33,5%
MAX WIND SPEED ....................................................................................12,5 m/s
MAX ADMITTED MANUAL FORCE ..................................................................40 kg
RUBBER CRAWLER WIDTH- OPEN/CLOSE ........................................786/1086 mm
NB: The side range is measured from the centre of the fifth wheel to the outer
side of the control car.
BOOM LIFT MODELS X14JH
JLG
10 X14JHR0220311