JLG X14JH Operator Manual User Manual
Page 55
The travel function can be controlled from the ground position only when the machine has to
pass pass through reduced‑height or narrow spaces. In these cases, to allow the machine to
access these spaces, the two‑place cage must be removed.
In this case the machine can be moved forward by an operator in the ground position, but
only lengthwise AND ONLY FROM THE RIGHT SIDE AND WITH THE CAGE REMOVED.
In such conditions it is absolutely forbidden to use the 2
nd
travel speed.
Always choose a proper rpm to have a precise control of the movements and also according
to the operating area.
Never climb or get off the basket if it is not completely lowered.
Controlling the travel of the machine from the ground with the cage removed is conside‑
red an extraordinary procedure that should be adopted only when the work area cannot be
reached in any other way.
The standard machines have not been homologated for road circulation. The working areas
and autonomous transfers must be circumscribed and signalled according to current regula‑
tions. For transfers even short ones on public road, the machine must be carried on homolo‑
gated vehicles.
After reinstalling the cage, put back the iron caps immediately.
‑
When controlling the translation of the machine from the control car, take the maximum
care of elements like cornices, terraces, lintels, branches etc. that could come into contact
with the operator.
‑
In case of ground control of the machine (see the a.m. admitted cases), remember that
the machine must have the control car removed.
‑
It is absolutely forbidden to do manoeuvres different from the above mentioned ones by
controlling translation from the ground as a possible sharp movement of the machine
could crush the operator between itself and the elements present on the manoeuvring
area or make the operator come into contact with the rubber tracks or the platform stabi‑
lisers.
‑
You must not translate when the stabilisers are not completely raised and placed in tran‑
sport position.
‑
The second translation speed (optional) can be used only on a straight and levelled sur‑
face on a solid ground.
BOOM LIFT MODELS X14JH
JLG
52
X14JHR0220311
PERICOLO
PERICOLO
IMPORTANTE
PERICOLO
DANGER
DANGER
DANGER
IMPORTANT