JLG X14JH Operator Manual - Manual (Page 64)

61
objects. Remember that no safety device can help you when you are in the air with the over‑
loaded basket, as its emergency descent does not guarantee against turning over. The only
way to be safe is to go back as soon as possible within the admitted load limits for the basket
according to the working configuration by unloading the basket.
2.9.9.5 USE FOR PAINTING, SAND BLASTING AND PLASTERING
This type of use requires a meticulous protection of the delicate parts of the machine like the
rods of the hydraulic cylinders, their gaskets, safety devices, telescopic hydraulic withdraws
and inscriptions on the machine (e.g. manufacturer’s plate, warning stickers, load chart etc.).
If sand gets mixed with the protection grease of the withdraws it becomes an extremely abra‑
sive mixture compromising the quality of the machine movements and its life.
2.9.9.6 USE IN SALTY ENVIRONMENT
If the machine is used in environments with a particular corrosive atmosphere, do more fre‑
quent checks regarding rust and the state of greasing and lubrication of the mobile parts
than the ones recommended by the manufacturer in normal conditions.
Cover the machine every time you are not using it even for short periods to protect it from
salt and sand carried by the wind.
2.10 REMOVAL OF THE BASKET
The basket can only be removed to allow passage through holes measuring 1500 and 790 mm.
IF THE MACHINE DOES NOT HAVE A BASKET , YOU CAN ONLY MOVE THE TRACKS AS DESCRIBED ON
PARAGRAPHS
2.1
AND
2.9.4.
To remove the basket act as follows:
‑ Unscrew the aluminium lids on the two basket mounting trunnions (see photo);
‑ SRemove the basket from above.
Re‑assemble the basket as follows:
‑ Insert the basket into the fixing screws on the basket sup‑
BOOM LIFT MODELS X14JH
JLG
X14JHR0220311
ATTENZIONE
WARNING