JLG X14JH Operator Manual - Manual (Page 44)

41
2.6.1 EMERGENCY STOP PUSHBUTTON
It allows the complete stop of any function of the machine in case of emergency.
There are two devices on the machine for emergency stop. The first one is situated on the
platform crawler near the controls just above the fifth wheel (1), the second one is situated on
the basket and is directly fixed on the electric control panel of the control car (2). When the
device is on, turn the pushbutton to make the machine operative.
It is strongly recommended to follow the rule that forbids operating the platform without
anyone on the ground. In fact, an incidental operation (e.g. the falling of a branch) or volun‑
tary from strangers of the emergency stop pushbutton on the revolving turret would put the
occupants of the basket in the difficult situation of not been able to operate any movements,
except the descent with the emergency descent devices (par.2.4.1.5.).
2.6.2 SWITCH ENABLING EMERGENCY CONTROLS
These devices (1‑3) is a tap that allows the operator on the ground to switch the controls
from the control car to the emergency position situated on the revolving turret (2).
It is strongly recommended to follow the rule that forbids operating the platform without anyone
on the ground. In fact, activating the switch by unqualified people could put the occupants of the
basket in a difficult situation of not been able to operate any movements and to be dependable on
the operating movements from the ground. If this was to happen, activate the emergency push‑
button and ask for help, or use the emergency descent devices (par. 2.9.8).
BOOM LIFT MODELS X14JH
JLG
X14JHR0220311
2
1
IMPORTANTE
2
1
IMPORTANTE
IMPORTANT
IMPORTANT
3