AiM MyChron3 XG Log - Manual (Page 11)

2 3 1
All temperature sensors are supplied with a 0.25 m long connection cable.
Thermocouple or thermoresistance extension cables are available with lengths
included between 0.5 and 2 m and, on request, as specified dimensions.
The LAP receiver
The infrared lap receiver is used to recognise a signal, called “lap marker”,
emitted from an infrared transmitter (Beacon).
The Infrared receiver has to “see” the
transmitter placed on the trackside, so
remember to install it with the receiver
eye (the grey point in the photo on the
left) pointed to the beacon transmitter.
11