AiM MyChron3 XG Log - Manual (Page 15)

In particular, pay attention when installing the Junction box:
•
•
•
Avoid rigid connections between the Junction box and the chassis. It is
suggested to use anti-vibration mountings (Silent Blocks).
We remind you that your MyChron 3 Gold XG is not equipped with
internal batteries, and so it needs to be powered by an external power
source (i.e. the car battery).
In order to correctly measure the lateral g-force using the lateral
accelerometer (mounted inside the Junction box), it is suggested to install
the gauge with the Junction box’s front panel perpendicular to the car’s
speed, as shown in the following image.
Internal lateral accelerometer
CH2
CH1
CH4
CH3 Power IN
GEAR Beacon
Speed
RPM
Speed
direction
Lateral
accelerometer
Junction
Box
15