AiM MyChron3 XG Log - Manual (Page 49)

During restart time, the operative system will recognize a new hardware and will
ask you to install the proper driver, driver that is included either in Race Studio 2
installation CD-ROM or in the “X:/Program files/AIM/USB_DRIVER” folder on
your PC”.
The driver file name is WDUSB522.inf.
In the following pages it will be reported two examples concerning the USB
drivers’ installation for the Microsoft Windows 98 ™, Microsoft Windows
2000 ™ and Microsoft Windows XP ™ operative systems.
How to install the USB Driver for Windows 98 ™:
1. Press [ Next ] button when the “Add new Hardware wizard” window
appears.
2. Select [ Search for the best driver for your device ] and press the [ Next ]
button again.
3. Place the Race Studio 2 disk in the computer’s CD-ROM drive if it is not
already there.
4. If the autorun option is enabled the system will try to install
Race Studio 2. As you have already installed it, please exit installation
menu. If the autorun option is enabled, go directly to next installation
step.
5. Place a check beside [ CD-ROM drive ] and click the [ Next ] button.
6. Click the [ Next ] button again.
7. The installation software has to search for WDUSB522.inf.
8. Click the [ Finish ] button once reached the end of the installation.
9. Restart the computer if prompted.
49