AiM MyChron3 XG Log - Manual (Page 38)

MyChron 3 Plus/Gold/Gold XG segments data for a session as a test and each
test includes the laps completed in that session. To begin recording a new test
you may switch off your instrument and then switch it back on, or you may press
the MEM button: once you exit the “retrieve data from memory” function, your
MyChron 3 Plus/Gold/Gold XG will record data in a new test session.
Viewing data
while driving
MyChron 3 Plus/Gold/Gold XG will display “Test 01” or the
current test number if memory has not been cleared, and “Lap
001” once the infrared receiver passes the beacon transmitter.
If the system has been configured to capture back segments
using the number of splits option, the system will display “Split
Number x”, up to the number of splits selected. Once the
system records times for each split, the final segment is
displayed as a completed lap.
At the same time the system displays the time gap between the
current split time and the split time of the previous lap.
When the system records the best lap time for a test, the text
BEST LAP TIME
will appear on the display under the RPM graphical bar.
By pressing button VIEW it is possible to visualize, instead of
lap time, the RPM digital value or vehicle’s speed.
The four analog inputs are shown on the left of the display: the
system will display, as a default, channels number 1 and
number 2.
38