AiM MyChron3 XG Log - Manual (Page 26)

intermediate before the finish line. In this example, you should
set a value included between 50” and 1’ 25”.
Example 3) The track is equipped with more than one lap transmitter and
you wish to capture split times
Intermediate 2:
Time 50”
Intermediate 1:
Time 30”
Start/Finish
Lap time 1’ 25”
• As the track is equipped with more than one transmitter and you wish to
capture split times, please set the following parameters:
o Split’s number = total number of lap transmitters installed on the
track excluded the one installed on the finish line. In this
example, set 2 split’s number.
o Beacon obscuring time: the obscuring time must be lower than
the minimum split time. In this example, as the minimum split
time elapsed is the one from the first intermediate to the second
one (split time 20”), please set the beacon obscuring time to 15”.
26