AiM MyChron3 XG Log - Manual (Page 61)

In the window previously shown, it is possible to set the channels acquired by
your MyChron 3 Plus/Gold/Gold XG.
• Channels labelled as CH_1 ÷ 4 may be used to acquire a temperature or
a pressure input, if you are using a MyChron 3 Plus, or may be used to
sample temperature, pressure, potentiometer or Lambda sond, if you are
using a MyChron 3 Gold/Gold XG. The user may choose the sensor
among a long list of Aim standard sensors or, otherwise, may set a
custom sensor by selecting the “Custom sensor management” (see
Customize sensor paragraph).
• If your MyChron 3 is a Gold version one, you may also install an external
gyroscope (for BIKE installations), labelled as CH_7, which will allow you
to create the circuit map.
• Your MyChron 3 Gold/Gold XG (CAR versions) has an internal lateral g-
sensor, labelled as ACC_1, which will allow you to create the circuit map.
61