AiM MyChron3 XG Log - Manual (Page 44)

MyChron 3 Plus/Gold/Gold XG and the computer
MyChron 3 Plus/Gold/Gold XG is equipped with an internal non volatile flash
RAM memory (512 kbyte for Plus version and 2 Mbyte for Gold/Gold XG ones)
which guarantees the capacity to record up to 315 laps and a total amount of 45
minutes (Plus version) or 3 hours (Gold/Gold XG ones) full analog inputs
record.
MyChron 3 Plus/Gold/Gold XG has been designed and developed to be
interfaceable with a PC: through an USB cable it is possible to connect the
gauge to a PC in order to both download the data stored in memory and
configure your instrument.
Aim reminds all MyChron 3 Plus/Gold/Gold XG owners that, for a correct,
complete and easier instrument configuration, it is absolutely necessary to
use a PC and the software Race Studio 2.
This software has been properly developed by Aim in order to interface all its
products (Drack, EVO 3, MyChron 2, MyChron PRO, Dash ST1, MyChron 3
standard/Plus/Gold) with the PC.
It is reminded that the new software installation does not either cancel or
influence the functionalities of Race Studio 1. Once installed the program, the
user will be able to choose if to use the new software even with his old Aim
products (all supported by Race Studio 2) or if to keep on using the previous
program. It is also reminded that Aim newest products (MyChron 3, MyChron 3
Plus/Gold/Gold XG and Dash ST1) are only supported by Race Studio 2.
44