AiM MyChron3 XG Log - Manual (Page 90)

How to use MyChron 3 Plus/Gold/Gold XG
Viewing data per best lap time
• Press MEM/OK to see the best lap and the maximum RPM and
temperatures values.
• Press MEM/OK to see minimum RPM and temperatures values.
• Press VIEW to switch from RPM to speed.
• Press VIEW twice to return to main display mode.
Viewing other completed lap data
• Press MEM/OK.
• Press MENU/<< to view a previous lap or >> to view a following lap.
• Press VIEW to return to main display mode.
Configuration via software
• Install Race Studio 2 software (see “Software installation” paragraph).
• Connect the instrument to a “switched on” PC by using the USB cable.
• Switch on your MyChron 3 Plus/Gold/Gold XG and install the USB
drivers (see “Installing the USB drivers” paragraph).
• Start Race Studio 2.
• Select MyChron 3 Plus/Gold/Gold XG and click “Logger manager”
button.
• Set the correct values in the boxes of the “New configuration” dialog box.
• Click “Channels” button.
90