AirLive Air3G - Manual (Page 22)

3. Configuring the Air3G
15 AirLive Air3G User’s Manual
To prepare your PC for management with the Air3G, please do the following:
1. Connect your PC directly to the LAN port on the DC Injector of Air3G
2. Set your PC’s IP address to “Obtain an IP address Automatically”. The Air3G should
provide your PC an valid IP address.
3. If you want to set your PC’s IP address manually, please set to 192.168.1.50 (or other
address in the same subnet)
You are ready now to configure the Air3G using your PC.
3.3 Introduction to Web Management
The Air3G can be configured using the Web management interfaces by simply typing its IP
address in the web browser. Most functions of Air3G can be accessed by it.
If you are placing the Air3G behind router or firewall, you might need to open the port 80 at
virtual server on your firewall/router. This procedure is not necessary in most cases
unless there is a router/firewall between your PC and Air3G.
3.3.1 Getting into Web Management
To get into the Normal Web Management, simply type in the Air3G’s IP address (default IP
is 192.168.1.254) into the web browser’s address field.
50