AirLive Air3G - Manual (Page 79)

7. Client Mode
AirLive Air3G User’s Manual 72
7.2.1 Regulatory Domain
Wireless Settings -> Regulatory Domain
The Regulatory Domain decides what channels and Tx output power levels are available
for your country. In most cases, the Regulatory Domain is already selected correctly for
your country. Please note that using the wrong Regulatory Domain is strictly prohibited.
If you live inside EU, you must use the ETSI Regulatory Domain. If you live in United
States, you must use FCC domain.
The Air3G is available with the following Regulatory Domain:
Regulatory Domain Available
Channels Maximum Tx Output Power
ETSI (Europe) 1 ~13 20dBm
FCC (United States) 1~11 23dBm
South America(11 CH) 1~11 30dBm
South America(14 CH) 1~14 30dBm
7.2.2 Profile Setting
Wireless Settings -> Profile Setting
.
A profile contains information about a remote AP’s network. In Client mode, you can
choose to connect with the remote AP using 2 methods.
„
1. Using Site Survey to find the AP you want to connect with, then select the SSID to
connect. This is the easiest way.
„
2. Create a profile about the remote AP you want to connect with. We will talk about
Profile in this section.
Procedure to Add a Profile
1. Click on Profile Settings on the Wireless Settings Menu. Then click on “Add” to add a
new profile