AirLive Air3G - Manual (Page 83)

7. Client Mode
AirLive Air3G User’s Manual 76
Select the SSID that you want to connect. Choose WPS mode to “Enrollee” and get a PIN
Code in the field. Then press “PIN Start” and the “WPS” LED flash will light two minutes
on the device’s housing.
Under AP site, Select Wireless Setting Æ WPS Setting. Choose WPS mode to “PIN” then
enter the PIN Code Æ click “Apply” and the connection will automatically configure.
Copy PIN Code
4
5
6
7
1
2
3