AirLive Air3G - Manual (Page 43)

4. Configuration: 3G Router Mode
AirLive Air3G User’s Manual 36
To configure Hotspot Authentication function, please go to Internet Settings-> Hotspot
menu. The following screen will appear:
„ Hotspot Authentication: Enable your hotspot Authentication here. You must
click on “Apply Change” to take effect.
„ Limit to one user per account: If you want to each user must have its own
account. Please check this box. You must click on “Apply Change” to take
effect.
„ Account Idle Timeout: After the period of inactivity, the Air3G will log out the
user. Please enter zero if you don’t want the account every expired. You must
click on “Apply Change” to take effect.
„ Create Accounts: Please enter the “Username” and “Password”, then click on
“Add” to create an account.
„ Account Table: This field will display the information about accounts. You can
modify the username/password directly on the table cell then click on the “Modify”
button. The “Last Login Traffic” shows the data transmitted during the last login
session.