3 wds settings – AirLive Air3G User Manual
Page 88
8. WDS Bridge Mode
81
AirLive Air3G User’s Manual
performance of the data transmission in 11n and Turbo modes. It is recommended to
keep the settings on.
AckTimeOut:
When a packet is sent out from one wireless station to the other, it will
waits for an Acknowledgement frame from the remote station. The station will only
wait for a certain amount of time, this time is called the ACK timeout.
In most
conditions, please do not change the Tx and Rx Acktimeout value. The Air3G’s
default value is correct in most case.s.
8.2.3 WDS Settings
For Bridge network, it is required to enter the Wireless MAC address of all remote bridges
that is connected directly to your Air3G. The wireless MAC address is also known as
BSSID.
Encryp Type: You can use one of the following 4 encryption type.
None: no encryption is made. This is not recommended as it posts serious
security issue.
WEP: This is the most compatible type. However, it is also easier for
hackers to break. Use this only if AES or TKIP doesn’t work.