AirLive Air3G - Manual (Page 45)

4. Configuration: 3G Router Mode
AirLive Air3G User’s Manual 38
Enable Auto Switch Backup
Check this box to enable the Air3G to switch from secondary connection back to primary
connection if the primary connection is back online.
For example, if you choose “WAN with 3G Backup” as Internet Source. When this option
is enabled, in the event of WAN failure and switched to 3G connection, the Air3G will
monitor whether WAN is back online. If yes, then it will switch back to the WAN
connection.
Please note that during the connection switch, the Air3G will reboot. It might
cause temporarily service disruption.
„ Polling IP: This is the IP address for which the function will ping to monitor whether the
primary connection is back online. The Air3G will ping this IP about once per minute.
„ Polling Tries: How many successful PINGs to the Polling IP are needed before Air3G
decides the primary connection is back online.
Once the primary connection is back on line, the Air3G will reboot back to the primary
connection after about 5 minutes.
4.5 Wireless Settings Menu
When you select “Wireless Settings” on the top menu; the following screen will appear: