9 wds settings (repeater) – AirLive Air3G User Manual

Page 75

Advertising
background image

6. AP Mode

AirLive Air3G User’s Manual

68

6.2.9 WDS Settings (Repeater)


This is known as WDS Repeater function. In AP mode, the Air3G will repeat the wireless
signal of remote AP/Router. Up to 4 WDS repeaters can be connect with Air3G. WDS
works by entering the wireless MAC addresses (also known as BSSID) of remote Access
Points.

„ EncrypType: You can use one of the following 4 encryption type.

„ None: no encryption is made. This is not recommended as it posts serious

security issue.

„ WEP: This is the most compatible type. However, it is also easier for

hackers to break. Use this only if AES or TKIP doesn’t work.

„ TKIP: Temporal Key Integrity Protocol, TKIP is more secured than WEP but

Advertising