AirLive Air3G - Manual (Page 59)

5. System Configuration and Status Menu
AirLive Air3G User’s Manual 52
5.2 LAN Interface Setup
System Configuration>> LAN Interface Setup
This menu is where you can configure all the aspect about LAN interface including IP
address, DHCP server settings..etc.
5.2.1 DHCP Settings
„ DHCP Service: You can enable or disable DHCP server here.
z Disable: Disable DHCP server. By default, the DHCP server is OFF
in AP, Client, and WDS Bridge mode.
z Server: The Air3G will act as DHCP server to provide IP addresses to
the clients on the LAN/Wireless interface. By default, the DHCP server
is on in 3G router mode.
„ DHCP Client Range: You can define the IP pool from which the DHCP clients can
get IP address.. Click on “Show Clients” to see the current DHCP client table.
„ Lease Time: You can define how long the Air3G will reserve IP address for a
Device IP
Settings
DHCP
Settings