AirLive WL-1200CAM - Manual (Page 37)

AirLive WL-1200CAM User’s Manual
34
2.4.3 MJPEG
If you selected ‘MJPEG’ as the video encoding format of this IP camera, you can specify the
parameters of MPEG4 video encoder here.
The descriptions of every setting in this menu will be given below:
Item Description
Video Resolution Specify video resolution of MJPEG video encoder. Available options
are VGA, QVGA, and QQVGA resolution. VGA resolution provides
more details than QVGA and QQVGA, but requires more network
bandwidth.
Video Quality Specify video encoding quality of MJPEG video encoder. There are
five levels of video quality from highest to lowest. Higher video
quality provides better video quality, but requires more network
bandwidth.
Video Frame Rate Specify video refresh rate of MJPEG video encoder. Higher video
refresh rate provides more details about motion, but requires more
network bandwidth.
CAUTION: Choosing a low frame rate will save bandwidth, but may
not be able to capture every motion if the object that IP camera
points to is moving fast.
Click ‘Apply’ to save settings and make the new settings take effect.