4 pppoe settings – AirLive WL-1200CAM User Manual
Page 63
AirLive WL-1200CAM
User’s Manual
60
3.3.4 PPPoE Settings
The ‘PPPoE Settings’ tab lets you to setup the PPPoE account required to build a PPPoE
(Point-to-Point Protocol over Ethernet) connection, primarily used by ADSL.
The descriptions of every setting in this menu will be given below:
Item
Description
Enable PPPoE
Select
‘Enable’ to activate PPPoE function of this IP camera, select
‘Disable’ to disable it.
User Name
Input the PPPoE username assigned by your ISP here.
Password
Input the PPPoE password assigned by your ISP here.
MTU
Input the MTU (Maximum Transmission Unit) given by your ISP here.
Ask your ISP if you don
’t know what value you should input here, or
use default value.
After all settings are completed, click ‘OK’ to save settings, or click ‘Cancel’ to abort and discard
changes.