AirLive WL-1200CAM - Manual (Page 59)

AirLive WL-1200CAM User’s Manual
56
3.3.2 Wireless Settings
The ‘Wireless Settings’ tab lets you to configure the wireless network settings of the IP camera.
The descriptions of every setting in this menu will be given below:
Item Description
Wireless Connection Select ‘Enable’ to enable the wireless interface of this IP camera;
select ‘Disable’ to switch wireless interface off. If the wireless interface
is disabled, all setting items in this tab will be grayed out.
Available Network Shows all wireless devices found, and their SSID (the name of
wireless device) and signal strength. If the SSID of wireless device is
hidden,
the ‘SSID’ of the wireless device will appear blank.
Refresh Click to search wireless devices again. Sometime a wireless device
will not be shown before you click ‘Refresh’ for several times.
Connect Connect to the selected wireless device in the list. If the wireless
device requires authentication / encryption, you’ll be prompted to input
required information.
Add to Profile Save selected wireless device to profile. However, if the wireless
device you selected requires authentication / encryption, you need to
edit the profile and input required information before you can connect
to the wireless device.
Add Create a new profile. You’ll be prompted to input these information: