AirLive WL-1200CAM - Manual (Page 88)

AirLive WL-1200CAM User’s Manual
85
b. Unplug the power adapter from wall socket and plug it in again
after 10 seconds, then try to connect to the IP camera again.
c. If IP camera is correctly powered (‘Power’ LED is on), but you
still can not connect to the camera when you ’re sure that IP
address is correct, please contact dealer of purchase for help).
Image is fuzzy a. Adjust the focus ring on the camera until the image becomes
clear.
b. Use a soft cloth to clean the lens on the camera. You can use
cloth with water, but DO NOT use alcohol or other chemical
solution.
c. Try to adjust brightness setting.
d. If there ’s any light at the place where IP camera is located,
switch it on and see if image looks better.
I set the IP camera to
send image by Email or
FTP, but nothing is
received
a. If the image is send by Email, please make sure it ’s not
blocked by any anti-spam mechanism.
b. Please make sure you have enough permission for FTP
uploading (You can try this by clicking ‘Upload a test file’ button).
c. Make sure the user name and / or password of SMTP server is
correct, if your SMTP server requires authentication (You can try
this by click ‘Send a test Email’ button).
d. Please check log, if FTP upload or Email sending is failed, it
will be logged, and this may give you some clue on how to solve
the problem.
e. Change the threshold to a more sensitive setting.