AirLive WL-1200CAM - Manual (Page 67)

AirLive WL-1200CAM User’s Manual
64
3.3.8 Advanced Settings
You can set advanced network settings like UPnP and DDnS here.
The descriptions of every setting in this menu will be given below:
Item Description
UPnP Select ‘Enable’ to activate UPnP (Universal Plug-and-Play) function,
so the IP camera can be located by UPnP-compatible computers /
devices. Select ‘Disable’ to disable it.
DDNS Select ‘Enable’ to activate Dynamic DNS function of this IP camera,
select ‘Disable’ to disable it.
Provider Select dynamic DNS service provider from drop down menu here.
Only dyndns.org is available currently.
Host Name Input dynamic DNS host name here.
User Name Input dynamic DNS user name here, must be the same as the one
you applied on dyndns.org.
Password Input dynamic DNS password here, must be the same as the one
you applied on dyndns.org.
After all settings are completed, click ‘OK’ to save settings, or click ‘Cancel’ to abort and discard
changes.