AirLive WL-1200CAM - Manual (Page 40)

AirLive WL-1200CAM User’s Manual
37
The descriptions of every setting in this menu will be given below:
Item Description
Recipient E-Mail
Address
Input the email recipient ’s Email address here.
SMTP Server Input the IP address or host name of the SMTP server (the server
that delivers the Email for you) here.
If you don ’t know, please refer to the SMTP server you’re using in
your Email software (like Outlook, Outlook Express etc.), or ask your
network administrator or ISP.
Sender E-Mail
Address
Input the Email address of mail sender, this will help you to identify
the Email sent by this IP camera by sender ’s Email address.
NOTE: Some mail server would reject to deliver the Email from
unknown sender, it
’s recommended to input your own Email address
here, or any other actual one.
SMTP Authentication Some SMTP server requires mail senders to be authenticated before
they can send Email. If your SMTP server requires you to do so,
please select ‘Enable’, or select ‘Disable’ to disable it. If you don’t
know, please refer to the SMTP server you ’re using in your Email
software (like Outlook, Outlook Express etc.), or ask your network
administrator or ISP.
User Name Please input the user name of SMTP server here, if your SMTP
server requires the use of authentication.
Password Please input the password of SMTP server here, if your SMTP server
requires the use of authentication.
Click ‘Apply’ to save settings and make the new settings take effect.
After that, you can click ‘Send a test email’ to send a testing Email to the address you set here, so you
can make sure the setting you specified here is correct and working.