AirLive WL-1200CAM - Manual (Page 60)

AirLive WL-1200CAM User’s Manual
57
Profile Name: Give the profile a name so you can distinguish from
others.
SSID: Please specify the SSID of the wireless device you wish to
connect; you MUST know the SSID of wireless device you wish to
connect.
Channel: Select the radio channel number of this profile, must be the
same with the wireless device you wish to connect.
Network Type: If the network device is a wireless access point, you
should select ‘Infrastructure’; if the network device is a computer, you
can try ‘Ad Hoc’.
Authentication Type: Set the authentication type required by the
network device you wish to connect here (Select one from drop down
menu).
Encryption Type: Select the encryption type required by the network
device you wish to connect here, the content of drop down menu will
vary depend on the authentication type you selected above.
WPA Pre-Shared Key: Input the WPA pre-shared key of the wireless
device you wish to connect here. Must be the same with the setting of
the wireless device you wish to connect, or you’ll not be able to build
connection. This option will be grayed out when encryption type is not
WPA.
Key Length: Select the key length of WEP encryption. Must be the
same with the setting of the wireless device you wish to connect.
Key Format: Key Length: Select the key format of WEP encryption.