AirLive WL-1200CAM - Manual (Page 56)

AirLive WL-1200CAM User’s Manual
53
The default user name is ‘admin’ (you can not change it), and the default password is ‘airlive’, and then
click ‘OK’ to continue.
The descriptions of every setting in this menu will be given below:
Item Description
Internet Camera Name The name of this IP camera. If you have more than one IP camera, it’s
suggested to use the place’s name where camera is located, so you
can identify the camera easily, like ‘Garden’ or ‘Front Door’. Spaces
are allowed.
IP Address Please specify the IP address you wish to assign to this IP camera.
Subnet Mask Please specify the subnet mask you wish to assign to this IP camera.
Gateway Please specify the IP address of the gateway of the your network.
Video Port Please specify the port number for video transmission.
When you finish setting, click ‘Finish’, and you’ll be prompted that the camera is rebooting:
The following message will appear after few seconds, if you wish to connect to the IP camera and see
the images captured by IP camera, click ‘OK’; otherwise click ‘Cancel’ to exit.