AirLive WL-1200CAM - Manual (Page 55)

AirLive WL-1200CAM User’s Manual
52
All found cameras will be displayed at the left of admin utility, which begins with ‘IC-‘ and the last 6
characters of IP camera’s network MAC address (the ‘IC-3010AF’ item in this example). You can check
the MAC address label at the back of the camera to distinguish from different cameras, if you have
more than one IP camera connected to your network.
If no camera is found, please go to section 1-6 and 1-7 and check if everything is correctly configured.
You will see a letter located at the left of camera’s name (‘N’ in the example above), which indicates the
status of each IP camera:
‘N’ indicates the camera is newly found and not configured;
‘D’ indicates the camera is disconnected, and
‘M’ indicates the camera is connected.
Please select a camera, and the camera’s current setting will be displayed at ‘Information of Camera’
section (right). You can click the ‘+’ sign at the left of ‘Network Information’ and ‘Wireless Information’ to
check respective settings of selected camera:
If you want to change these settings, please click ‘Detail Setting’ or ‘Setting Wizard’.
If you only need to change the basic network setting, click ‘Setting Wizard’. You’ll be prompted to input
user name and password: