AirLive WL-1200CAM - Manual (Page 58)

AirLive WL-1200CAM User’s Manual
55
The descriptions of every setting in this menu will be given below:
Item Description
DHCP Select ‘Enable’ to use DHCP to configure the IP address of this IP
camera via
DHCP server automatically; select ‘Disable’ to configure
the IP address manually.
Camera Name The name of this IP camera. If you have more than one IP camera, it’s
suggested to use the place’s name where camera is located, so you
can identify the camera e
asily, like ‘Garden’ or ‘Front Door’. Spaces
are allowed.
IP Address Please specify the IP address you wish to assign to this IP
camera.
Subnet Mask Please specify the subnet mask you wish to assign to this IP camera.
Gateway Please specify the IP address of the gateway of the your network.
DNS Server Please specify the IP address of the DNS server of your network.
Video Port Please specify the port number for video transmission, default value is
‘4321’.
Web Port Please specify the port number for web management interface, default
value is ’80’.
After all settings are completed, click ‘OK’ to save settings, or click ‘Cancel’ to abort and discard
changes.