CCTV Camera Pros iDVR-PRO H Series DVRs - Manual (Page 17)

English | 17
Ins
tall
atio
n
4. Once the HDD bracket is separated from the main
unit, remove 4 screws on both ends of HDD bracket
to separate the HDD from the bracket.
5. Install a new HDD and fasten 4 screws back to both
ends of the bracket to fix it.
 When installing HDD, make sure to install in the correct
direction.
6. Push the bracket installed with new HDD back into
the main unit until it is completely inserted.
7. Assemble the front panel back to the unit.
J When assembling the front panel to the main unit, make
sure the marked part is tightly attached.
8. Fasten 2 screws on both ends of the main unit.
DVR Assembly
Direction