CCTV Camera Pros iDVR-PRO H Series DVRs - Manual (Page 72)

Record Setting
72 |
Record Setting
\ \ Continuous Recording
You can configure the settings of: continuous recording time, recording size, frame rate per second and quality.
1. From the <RECORDING> menu, select <CONTINUOUS RECORDING>.
 From <OPERATION MODE>, you must set <RECORDING CONFIGURATION MODE> to <MANUAL CONFIGURATION> before
you can set the <CONTINUOUS RECORDING>.
2. Use the [ ▲▼◀▶ ] buttons on the remote control or use the mouse to select either <SIZE/FPS/QUALITY> or
<SCHEDULE>.
Size/FPS/Quality Setting
1. Please select the day of the week to perform the
continuous recording.
From <OPERATION MODE>, you must set
the <SCHEDULE MODE> of the <MANUAL
CONFIGURATION OPTIONS> to <WEEKLY>
before you can specify the <DAY>.
2. Click a time cell from which you want to edit the
SIZE/FPS/Quality and drag it to a desired cell.
Or use the [ ▲▼◀▶ ] buttons on the remote control to
move to the cell and press [ENTER]. Then, use the
[ ▲▼◀▶ ] buttons to move to a desired cell and press
[ENTER] again.
3. When the cell selection is complete, the "SIZE/FPS/
QUALITY" table appears.
J Specify the <RESOLUTION>, <FPS>, <QUALITY> and
use of the <AUDIO> recording for each channel.
i
RESOLUTION : set the size of the video recording.
i
FPS : set the frame rate per second.
i
QUALITY : set the recording quality.
i
AUDIO : specify the use of the audio recording.
4. When done, click <OK>.
You can check the recording size in the size table
under the time selection bar.
J The video resolution and the FPS option may differ depending on the specification of the camera.