CCTV Camera Pros iDVR-PRO H Series DVRs - Manual (Page 66)

System Setting
66 |
System Setting
\ \ Video Loss
You can specify a reaction to the case where no video is received from the camera.
1. From <SYSTEM SETUP> - <EVENT>, select
<EVENT LOSS>.
2. Use the [ ▲▼◀▶ ] buttons on the remote control or use
the mouse to specify the reaction to a video loss
i
ALARM OUT : Specify the alarm output channel if
a video loss occurs.
i
PRESET : On video loss
’
s detections, the camera
moves as defined by the selected preset.
i
: Specify the output of the buzzer if a video
loss occurs.
i
: Select to send an email if a video loss
occurs.
i
: Select whether to upload event notification onto the FTP upon detected video loss event.
3. To apply the change, click <APPLY> in the bottom of the screen.
4. When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
message appears and you will return to the previous menu.