CCTV Camera Pros iDVR-PRO H Series DVRs - Manual (Page 43)

English | 43
\ \ Monitor
If you change from monitoring mode to sequence, you will have to set the interval of the sequence.
1. From <SYSTEM SETUP> - <DISPLAY>, select
<MONITOR>.
2. Use the [ ▲▼◀▶ /ENTER] button of the remote control
or mouse to set the dwell for Sequence mode and
SPOT Out dwell.
i
SEQUENCE DWELL : Sets the time interval to
the next screen mode for Live monitoring, which
defines individual screen mode
’
s dwell time in the
Sequence. (Can set to 1 sec ~ 60 sec)
i
SPOT DWELL : Sets the time interval to the next
view type, which defines individual view type ’ s
dwell time for SPOT OUT. (Can set to 1 sec ~ 60
sec)
3. To apply the change, click <APPLY> in the bottom of the screen.
4. When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen.
The confirmation message appears and you will return to the previous menu.
\ \ Sequence
Select a split mode for the sequence, and also select a list of active items when the sequence is performed.
1. From <SYSTEM SETUP> - <DISPLAY>, select
<SEQUENCE>.
2. Use the [ ▲▼◀▶ /ENTER] buttons on the remote
control or use the mouse to add a sequence or
change the settings of the existing sequence.
i
ACTIVATION : Select a list that you want to activate
the sequence for. Only one list will become active.
i
ADD : add a sequence.
3. To apply the change, click <APPLY> in the bottom of
the screen.
4. When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
message appears and you will return to the previous menu.
Sy
ste
m
S
ett
ing