System setting, Event notification – CCTV Camera Pros iDVR-PRO H Series DVRs User Manual

Page 62

Advertising
background image

System Setting

62

|

System Setting

\

\

Event Notification

Specify the methods of notification such as buzzer, video popup or email if an event occurs.

1.

From <SYSTEM SETUP> - <EVENT>, select <EVENT NOTIFICATION>.

2.

Use the [

▲▼◀▶

] buttons on the remote control or use the mouse to select one from <BUZZER>, <DISPLAY> and

<EMAIL>.

3.

Use the [

▲▼◀▶

/ENTER] buttons on the remote control or use the mouse to set the output method and duration.

4.

To apply the change, click <APPLY> in the bottom of the screen.

5.

When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen. The confirmation

message appears and you will return to the previous menu.

Buzzer output

You can notify the user of the event using the buzzer.

i

DURATION

-

TRANSPARENT : Keep the buzzer out for as

much time as the event lasts.

-

UNTIL KEY : Keep the buzzer out until a mouse

or remote control button is pressed.

-

5 ~ 300 SEC : Keep the buzzer out for as long

as specified.

Display

If an event occurs, you can display the video screen or a popup message to notify the user of the event.

i

VIDEO POPUP : Display the video channel that is

synchronized with the event on a single split screen.

Set the DURATION of the single split screen.

-

TRANSPARENT : Keep the video popup

displayed for as much time as the event lasts.

-

UNTIL KEY : Keep the video popup displayed

until a mouse or remote control button is pressed.

-

5 ~ 300 SEC : Keep the video popup displayed

for as long as specified.



If multiple events occur at the same time, or if

multiple event-related video channels exist, the

video popup will be displayed in the maximum

split screen mode rather than the single split

screen mode.

i

OSD POPUP : This will notify the user of the event with a popup message if an OSD popup event occurs.

You can adjust the duration of the popup message.

-

UNTIL KEY : Keep the OSD popup displayed until a mouse or remote control button is pressed.

-

5 ~ 300 SEC : Keep the OSD popup displayed for as long as specified.

Advertising