CCTV Camera Pros iDVR-PRO H Series DVRs - Manual (Page 25)

English | 25
M
on
ito
rin
g
\ \ START
1. Connect the adaptor to the power input port on the
DVR
’
s rear side.
J Make connection when the power is not applied yet.
2. Turn on the power switch in the rear panel of DVR.
With a beep, the logo screen appears several
seconds after the front LED turns on.
3. When the booting process is completed, the live
screen then the login screen appears.
\ \ Log In
To manipulate or access the menus of DVR, you should have logged in.
1. When the system starts, the login screen appears.
2. Select a user and provide the password.
The default password of the "ADMIN" account is
"1234".
3. Click <OK>.
If the login information is correct and valid, you will
see the live screen.
J For security purpose, change the password before you
use the product for the first time after purchasing it.
\ \ Log Out
To prevent unauthorized access, it is recommended to log out when you leave the screen.
 Hover the cursor near the bottom of the screen to display the menu.
1. In the monitoring screen, click <MENU> in the
bottom left corner of the screen to <LOG OUT>, or
press the [LOGOUT] button on the remote control.
2. While logged out, Search / Backup / System Settings
/ Record Settings / Exit menus are restricted to use.
Monitoring