CCTV Camera Pros iDVR-PRO H Series DVRs - Manual (Page 41)

English | 41
\ \ TEMPER DETECTION
You can set to detect tampering attempt to interfere monitoring operations by tampering the installed camera.
1. Select the <TEMPER DETECTION> from the
<CAMERA> menu items in <SYSTEM SETUP>.
2. Use [ ▲▼◀▶ ] buttons on the remote or the mouse
to select <MARK, SENSITIVITY> and set the
tampering detection conditions appropriately.
3. For each channel, set the day/night sensitivity.
4. Set the activation of each channel, and set whether
to display indicator on the screen.
i
SENSITIVITY
- LEVEL : The detection sensor ’ s sensitivity for
each detection block. (Can be separately set
for day / night modes)
i
ACTIVATION : Set the detection for each channel
to be enabled/disabled.
i
MARK : Turns on or off the detection indicator to
be displayed on the screen.
5. To apply the change, click <APPLY> in the bottom of the screen.
6. When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
message appears and you will return to the previous menu.
Sy
ste
m
S
ett
ing