ElmoMC ExtrIQ Gold Line Servo Drives-Gold Eagle - Manual (Page 18)

Gold Eagle Installation Guide
MAN-G-EAGIG-EC (Ver. 1.000)
||Introduction| www.elmomc.com
18
Table of Contents
Wiring Symbol Description
D-type Connector: The cable`s braid
(Shield) must be connected to the D-
sub shell (metal housing)
Encoder Earthing.
The cable`s shield is connected to the
chassis (PE) in the connector.
Earthing the Encoder and connecting
the Earth (PE) to the drive COMRET is
mandatory to insure reliable
operation, high noise immunity and
rejection of voltage common mode
interferences.