ElmoMC SimplIQ Digital Servo Drives-Bell Getting Started - Manual (Page 17)

The SimplIQ for Steppers Getting Started & Tuning and Commissioning Guide
MAN-BELGS (Ver. 1.1)
17
Figure 14: Firmware message
2.4 The Conductor Wizard
2.4.1 The Conductor Tabs
The Conductor is the main tool for tuning the SimplIQ control functions.
Figure 15: The Conductor window
The Conductor manages some experiments for the tuning current and motion
controls. You have a lot of flexibility in managing the experiment, but you do not
need to be an expert.
A color code defines which parameter fields you may leave as is, and which require
your attention and understanding – refer to the figure below.