Tuning or checking the current control, 2 tuning or checking the current control – ElmoMC SimplIQ Digital Servo Drives-Bell Getting Started User Manual
Page 29
Advertising
The SimplIQ for Steppers Getting Started & Tuning and Commissioning Guide
MAN-BELGS (Ver. 1.1)
29
3.4.2 Tuning or Checking the Current Control
In the same window, select the automatic current control tool.
Figure 29: Entering the current control tuner
The following window opens:
Figure 30: Current tuning window
In general, you do not have to change anything in this window, just click Start.
When tuning is over, you will see a graph of the resulting current controller
response.
Advertising