ElmoMC SimplIQ Analog Servo Amplifiers-Cymbal - Manual (Page 17)

Cymbal Installation Guide Installation
MAN-CYMIG (Ver. 1.3)
17
3.5.1. Connecting the Power Cables
The main power connector located at the bottom of the Cymbal, as follows:
Pin Function Cable Pin Positions
VP+ Pos. Power input Power
VN‐ Neg. Power input Power
PE Protective earth Power
AC Motor
Cable
DC Motor
Cable
PE Protective earth Motor Motor
M1 Motor phase Motor N/C
M2 Motor phase Motor Motor
M3 Motor phase Motor Motor
Note:
When connecting several motors, all must be wired in an identical manner.
PE PE
PE PE
Table 4: Connector for Main Power and Motor Cables
www.elmomc.com