ElmoMC SimplIQ Analog Servo Amplifiers-Cymbal - Manual (Page 23)

Cymbal Installation Guide Installation
MAN-CYMIG (Ver. 1.3)
23
Pin Signal Function Pin Position
J1‐9 Backup+ Supply +VDC backup supply
J1‐8 Backup‐ Supply Return (common) of the backup
supply
Table 6: Backup Cable Plug
Figure 9: Backup Supply Connection Diagram
Note: The return of the backup supply must not be connected to PE, as such a connection can
damage the drive.
“Smart” Control
Supply Options Internal DC‐to‐DC converter that allows operation from DC power (no
need for auxiliary external supply for normal operation).
12 to 195 VDC supply for backing up the control parameters if DC power
is shut off.
J1
Male
www.elmomc.com