Chapter 2: introduction, Extriq product family, Chapter 2 – ElmoMC ExtrIQ Digital Servo Drives-Hawk User Manual
Page 12: Introduction, Extriq, Product family
Hawk Installation Guide
MAN-HAWIG (Ver. 1.401)
12
Chapter 2:
Introduction
This installation guide describes the Hawk servo drive and the steps for its wiring, installation
and power-up. Following these guidelines ensures maximum functionality of the drive and the
system to which it is connected.
2.1.
ExtrIQ
Product Family
Elmo Motion Control’s ExtrIQ product family is a set of durable motion control products for
applications operating under extreme environmental conditions. The products are capable of
withstanding the following extreme conditions:
Feature
Operation Conditions
Range
Ambient
Temperature
Range
Non-operating Conditions -50 °C to +100 °C (-58 °F to 212 °F)
Operating conditions
-40 °C to +70 °C (-40 °F to 160 °F)
Temperature
Shock
Non-operating conditions
-40 °C to +70 °C (-40 °F to 160 °F) within 3
min
Altitude
Non-operating conditions
Unlimited
Operating conditions
-400 m to 12,000 m (-1312 to 39370 feet)
Maximum
Humidity
Non-operating conditions
Up to 95% non-condensing humidity at
35 °C (95 °F)
Operating conditions
Up to 95% non-condensing humidity at
25 °C (77 °F), up to 90% non-condensing
humidity at 42 °C (108 °F)
Vibration
Operating conditions
20 Hz to 2000 Hz, 14.6g
Mechanical
Shock
Non-operating conditions
±40g; Half sine, 11 msec
Operating conditions
±20g; Half sine, 11 msec
ExtrIQ products have a high power density in the range of 50 W to 65,000 W and current
carrying capacity of up to 140 A (280 A peak). ExtrIQ has been tested using methods and
procedures specified in a variety of extended environmental conditions (EEC) standards
including:
•
MIL-STD-704- Aircraft, Electric Power Characteristics
•
MIL-STD-810- Environmental Engineering Considerations and Laboratory Tests
•
MIL-STD-1275- Characteristics of 28 Volt DC Electrical Systems in Military Vehicles
•
MIL-STD-461- Requirements for the Control of Electromagnetic Interference Characteristics
of Subsystems and Equipment
•
MIL-HDBK-217- Reliability Prediction of Electronic Equipment
•
ISO-9001:2008