Pinouts, Connector types – ElmoMC ExtrIQ Digital Servo Drives-Hawk User Manual
Page 19
Hawk Installation Guide
Installation
MAN-HAWIG (Ver. 1.401)
19
3.
To ensure that the Hawk you have unpacked is the appropriate type for your requirements,
locate the part number sticker on the side of the Hawk. It looks like this:
The part number at the top gives the type designation as follows:
4.
Verify that the Hawk type is the one that you ordered, and ensure that the voltage meets
your specific requirements.
3.3. Pinouts
The Hawk has nine connectors.
3.3.1.
Connector Types
Pins Type
Port Function
Connector Location
2x16
2 mm pitch
0.51 mm sq
J1
I/O, COMM,
Auxiliary Feedback
15
J2
Main Feedback, Analog
Input, LED
6
VL
Auxiliary power input
6
VP+ Positive power input
6
PR
Power input return
4
PE
Protective earth
6
M1
Motor power output 1
6
M2
Motor power output 2
2
M3
Motor power output 3