ETC SmartFade ML v3.0.1 - Manual (Page 10)

4 SmartFade ML v3.0.1 User Manual
Power-up and Shutdown Procedures
Unpack & Connect
You can get SmartFade ML up and running in no time.
• Unpack
• Connect power
• Connect DMX to dimmers, moving lights, scrollers and LEDs
• Power up
Power-up Procedure
SmartFade ML uses the power button for power-up and power-down. It is also used to
access the operating mode selection menu.
* During the startup process, LEDs will fade to full brightness regardless of user settings.
Shutdown Procedure
When you use the shutdown procedure, the SmartFade ML console will complete any
pending operations and save any system data as required to ensure error-free startup at
the next session. Disconnecting power from the console while it is shut down produces no
ill effects.
Action Console Feedback
Press and release The LCD shows the current software version.
The button LEDs will light up in the following
order: GREEN, RED, rest. After this all LEDs
light to the levels appropriate to the selected
mode of operation. *
Action Console Feedback
1. Press and release The LCD shows a message asking that you
confirm the shutdown command.
2a. Confirm Console is shut down.
2b. Cancel Shutdown is cancelled and operation
resumed.
<