ETC SmartFade ML v3.0.1 - Manual (Page 97)

5
Playback 89
Single Scene Crossfading
When STACK is off and NEXT is on, SmartFade ML is set up to run like a single-scene
crossfading console operating only on intensity levels.
To fade endlessly between Live and Next: hold PAUSE before reaching the end of a
crossfade - this will prevent the release of the intensity channels so you can fade back to
that look. Let go of PAUSE to terminate the crossfade.
Fade with Times
You can activate the TIME button and set default fade times with the wheels.
Press GO to execute a crossfade using these times.
Action Console Feedback
1. Activate Next mode The intensity faders no longer contribute to
the live output.
2. Set intensities Set up any intensities manually with the inten-
sity faders. They will not be output.
3. Crossfade manually Crossfaders Move the Crossfader pair from bottom to top.
As soon as both crossfaders reach the end of
the current fade, the intensity channels are
released from the Live fader for setting the
next look.
NEXT
NEXT
INT
A
INT
B
DEVICE
INT