ETC SmartFade ML v3.0.1 - Manual (Page 70)

62 SmartFade ML v3.0.1 User Manual
Record a Stack State or “Cue”
It’s possible to record any step of the Stack as a unique memory state. In other words it
does not reference a memory from any of the fader pages.
Set up a look you want to record, including effects. You have two recording choices, Record
All (everything you see on stage) and Record Selected.
Record All
Action Console Feedback
1. Activate record all All buttons that can record in this mode will
blink at full (press CLEAR to exit).
2. Choose Stack The Stack is selected and the buttons stop
blinking.
3. Select Record step or
Update live step.
Wheel 3 Record all to the next free step
Record all to replace the Live step
Adjust step (optional, when
recording a new step)
Wheel 1 Select step to record to. The next free step
from the current live step is auto-selected.
Adjust default times
(optional, when recording a
new step)
Wheel 1, 2 & 3
4. Confirm recording The moment the button is pressed, the output
is stored and the console will automatically
return to it’s previous fader mode. Press
UNDO to undo this recording.
REC
ALL
STACK